Install Lakka On Partition
DOWNLOAD ->>->>->> https://urllie.com/2tdYAS
Hello to everyone, I am in the middle of installing Lakka on a Rasberry Pi3, I installed using sudo apt-get install Lakka and then I transferred all of the unzipped files to the Pi using my USB data cable (I had to plug it into PC with Raspbian to transfer data). Once I transfered the files, I installed or reinstalled the software following this kind of guide: https://github.com/SickShady/Lakka/wiki/installation-guide My question is that the guide says to: use the “ubuntu nopaste” command, but unfortunately I am stuck at Step 4 because the command gives me this screenshot error: http://imgur.com/amxwMPV I really would appreciate if you guys/girls would help me out. I don’t want to be spending my free time fixing some messed up command or writing my own one :-S
I just ordered a Raspberry Pi4, and I usually listen to the Lakka Podcast for help with this sort of issue. Keep in mind - if you are going to install Lakka on the Pi4, it's very likely you will need to re-install your drivers, so you will likely want to keep some of your old data.
@merwok What I mean to say is that...I had to connect to my current wi-fi beforehand so I can ssh into my GPi Case. Plus, I'm not sure if I can just simply make a "wpa_supplicant.conf" and put it into the boot partition of the Lakka card just to change the wifi to wherever I end up at. d2c66b5586